PyroCb in Washington State

On 12 August a fire in the state of Washington was investigated for possibly producing a pyroCb. This fire located around 46 N 121.5 W, and showed signs of deep convection and possibly a pyroCb. GOES-15 detected the smoke plume and pyroCb cloud, as well as the fire hot spot. Starting at 18:00 UTC on 12 August, the animation below shows visible (.63 μm) on the left and shortwave IR (3.9 μm) on the right (click image to play animation). In the shortwave IR images the red pixels indicate very hot IR brightness temperatures exhibited by the fire source region.

GOES-15 0.63 µm visible channel (left) and 3.9 µm shortwave IR channel images (right) (click to play animation)

GOES-15 0.63 µm visible channel (left) and 3.9 µm shortwave IR channel images (right) (click to play animation)

In addition, using GOES-15 10.7 μm IR channel the cloud-top IR brightness temperature could be found. The animation below, starting at 18:00 UTC on 12 August, shows the brightness temperature -51.3ºC around 18:30 UTC (yellow color enhancement).

GOES-15 10.7 µm IR channel images (click to play animation)

GOES-15 10.7 µm IR channel images (click to play animation)

To further investigate the transport of smoke from this fire CALIPSO was used. This LIDAR shows the height of the clouds from the wildfire. The first image below is the 532nm Total Attenuated Backscatter plot on 12 August from 10:07 UTC to 10:30 UTC, which is about 8 hours before the pyroCb formed but smoke can still be seen in the area. The smoke from this fire can be seen extending from 46 N to 48 N  indicated by a red color.  The second image is 1064 nm Total Attenuated Backscatter plot, the smoke on this plot is indicated by a red color. The third image is the Depolarization image the smoke is indicated by a blue color. The fourth image is the Attenuated Ratio plot between 1064 nm and 532 nm. The smoke is indicated by the magenta pixels. The fifth image is the Vertical Feature Mask. This plot shows the different features that are in the atmosphere, the smoke is attributed as a cloud on this plot and is indicated by a light blue color. The last image shows the subtype of the aerosols that have been detected by the LIDAR. This shows that the aerosols that the LIDAR has detected are smoke (indicated by the black pixels) extending from 46 N to 48 N.

CALIPSO 532 nm Total Attenuated Backscatter on 12 August (click to enlarge)

CALIPSO 532 nm Total Attenuated Backscatter on 12 August (click to enlarge)

CALIPSO 1064 nm Total Attenuated Backscatter on 12 August (click to enlarge)

CALIPSO 1064 nm Total Attenuated Backscatter on 12 August (click to enlarge)

CALIPSO Depolarization Ration on 12 August (click to enlarge)

CALIPSO Depolarization Ration on 12 August (click to enlarge)

CALIPSO Attenuated Color Ratio between 1064 nm and 532 nm on 12 August (click to enlarge image)

CALIPSO Attenuated Color Ratio between 1064 nm and 532 nm on 12 August (click to enlarge image)

CALIPSO Vertical Feature Mask on 12 August (click to enlarge image)

CALIPSO Vertical Feature Mask on 12 August (click to enlarge image)

CALIPSO Aerosol Subtype plot on 12 August (click to enlarge image)

CALIPSO Aerosol Subtype plot on 12 August (click to enlarge image)

 

1 Comment

  • Rene Servranckx says:

    Hi Anna,
    Thanks for the post. The Cougar Creek fire produced a pyroCb later that day, starting around 1830 UTC. N19 showed coldest BT of -51.3 C at 2041 UTC over northern Washington State.

Leave a Reply to Rene Servranckx Cancel reply

Your email address will not be published. Required fields are marked *